HTTP client must be configured via `Settings::setHttpClient()`. This is
a small breaking change, but only for the very few people who started using
WEBSERVICE from last version.
Fixes#1562Closes#1568
* Fix For #1509
User expected no CSV enclosures after $writer->setEnclosure(''),
which had been changed to be consistent with $reader->setEnclosure('').
Writer will now omit enclosures after code above; no change to Reader.
Tests have been added for this condition.
* Add Option to Write CSV Enclosure Only When Required
Allowing the user to specify no enclosure when writing a CSV can lead to
a situation where PhpSpreadsheet (likewise Excel) will not read the
resulting file as intended, e.g. if any cell contains a delimiter character.
This is demonstrated in new test TestBadReread.
No existing setting will rectify this situation.
A better choice would be to add an option to write the enclosure
only when it is needed, which is what Excel does. The RFC4180 spec at
https://tools.ietf.org/html/rfc4180
states when it is needed - when the cell contains the delimiter,
or the enclosure, or a newline.
New test TestGoodReread demonstrates that the file is read as intended.
The documentation has been updated to describe the new function,
and to change the write example where the enclosure is set to null.
* Scrutinizer Suggestions
3 minor changes, all in tests.
Replace default gridlines with different style. Usable in PDF
as well as HTML.
Documentation mentioned use of setUseBOM with Html, but that method
does not exist, and there is no real reason to support it.
Removed it from documentation.
We give users the ability to edit Html/Pdf, but it's a little cumbersome
to use the edited Html for an Html file, and difficult to use it
for a Pdf. I believe we could make it fairly painless in both cases
by allowing the user to set a callback to edit the generated Html.
This can be accomplished with fewer than a dozen lines of very simple code.
I think this would be easier than grabbing the Html in pieces,
editing it, and reassembling it. I think it would also be simpler
than an alternative I considered, namely the addition of a new method
(e.g. saveEditedHtml) to each of the Html and Pdf writers.
One edit that users might like to make when editing html is to add
fallback fonts, something that is not currently available in
PhpSpreadsheet, and might be difficult to add. A natural extension to
that idea would be the use of webfonts, something which is guaranteed
difficult to add. See samples/Basic/17b_Html for an example of this.
None of the PDF writers support webfonts yet. That doesn't mean they
won't do so in future, but, for now, samples/Pdf/21a_Pdf is a prosaic
example of something you could do with this callback. In fact, this
opens the door to letting the user replace the entire body with data
of their choosing, effectively allowing PhpSpreadsheet (where you can
set things like paper size and orientation) to be used as a front-end to
the Pdf processor without the user having to be be overly familiar with
the vagaries of the PDF processor. I think this is actually a pretty
nice idea. YMMV. See samples/Basic/21b_Pdf for an example.
There are a number of situations where HTML write was producing
HTML which could not be validated. These include:
- inconsistent use of backslash terminating META, IMG, and COL tags
- @page style tags in body rather than header. Aside from being
non-standard, HTML Reader treats those as spreadsheet data.
- <div style="page-break-before:always" />, a construct which is
usually better handled through css anyhow.
- no alt tag for images (drawings and charts)
Other problems:
- Windows file names not handled correctly for images
- Memory drawings not handled in extendRowsForChartsAndImages
- No handling of different values for showing gridlines
for screen and print
- Mpdf and Dompdf do not require the use of inline css.
Tcpdf remains a holdout in the use of this inferior approach.
- no need to chunk base64 encoding of embedded images
- support for colors in number format was buggy (html tags
run through htmlspecialchars)
Code has been refactored when practical to reduce the number of
very large functions.
Coverage is now 100% for the entire HTML Writer module,
from 75% lines and 39% methods beforehand.
All functions dealing only with charts
are bypassed for coverage because the version of Jpgraph available in
Composer is not suitable for PHP7. The code will, nevertheless,
run successfully, but with warning messages. I have confirmed that
the code is entirely covered, without warnings, when the current
version of Jpgraph is used in lieu of the one available in Composer.
I will be glad to revisit this when the Jpgraph problem is resolved.
Directory PhpSpreadsheetTests/Writer/Html was created to house
the new tests. It seemed logical to move HtmlCommentsTest to
the new directory from PhpSpreadsheetTests/Functional.
A function to generate all the HTML is useful, especially for testing,
but also in lieu of the multiple other generate* functions. I have
added and documented generateHTMLAll.
The documentation for the generate* functions (a) produces invalid html,
(b) produces html which cannot be handled correctly by HTML reader,
and (c) even if those were correct, does not actually affect
the display of the spreadsheet. The documentation has been replaced
by a valid, and more instructive, example.
The (undocumented) useEmbeddedCss property, and the functions
to test and set it are no longer needed. Rather than breaking
existing code by deleting them, I marked the functions deprecated.
This change borrows a change to LocaleFloatsTest from
pull request 1456, submitted a little over a week before this one.
## Improve NumberFormat Support
First phase of this change included correcting NumberFormat handling
in HTML Writer. Certain complex formats could not be handled without
changes to Style/NumberFormat, and I did not wish to combine those changes.
Once the original change had been pushed, I took this part of it back up.
HTML Writer can now handle conditions in formats like:
[Blue][>=3000.5]$#,##0.00;[Red][<0]$#,##0.00;$#,##0.00
In testing, I discovered several errors and omissions
in handling of some other formats.
These are now corrected, and tests added.
I believe that both CSV Reader and Writer are 100% covered now.
There were some errors uncovered during development.
The reader specifically permits encodings other than UTF-8 to be used.
However, fgetcsv will not properly handle other encodings.
I tried replacing it with fgets/iconv/strgetcsv, but that could not
handle line breaks within a cell, even for UTF-8.
This is, I'm sure, a very rare use case.
I eventually handled it by using php://memory to hold the translated
file contents for non-UTF8. There were no tests for this situation,
and now there are (probably too many).
"Contiguous" read was not handle correctly. There is a file
in samples which uses it. It was designed to read a large sheet,
and split it into three. The first sheet was corrrect, but the
second and third were almost entirely empty. This has been corrected,
and the sample code was adapted into a formal test with assertions
to confirm that it works as designed.
I made a minor documentation change. Unlike HTML, where you never
need a BOM because you can declare the encoding in the file,
a CSV with non-ASCII characters must explicitly include a BOM
for Excel to handle it correctly. This was explained in the Reading CSV
section, but was glossed over in the Writing CSV section, which I
have updated.
While there is value in providing those, they also clutter IDE auto-complete feature.
Now they users can opt-in to download them via `--prefer-source` flag.
Closes#908Closes#1424
We often want to export a table as an excel sheet. The system renders the
html and it seems like a waste of time to write it to the file system to
use the reader. This allows us to render the html and then just pass it to
a reader
Closes#1136
* Merge branch 'master' of C:\Projects\PHPOffice\PHPSpreadsheet\develop with conflicts.
* New statistical tests
* Sniffs
* Additional statistical function unit tests
* Additional statistical function unit tests
* Fix case-sensitivity
* Fix HARMEAN code logic
* Unit tests refactored into individual files for all logical functions
Implemented IFNA()
* Fix silly typo
* NOT needs ...args to allow for test when no argument passed
* Codestyle
* Use instance asserts
* Document calculation caching; and how to disable it and how to flush the cache
* Quoted text for string values beginning with `=`, so that they are still treated as strings and not as formulae
* Warning about assigning cells to variables
* Further warning about assigning cells to variables
* getCell() with a second argument
* Added String Value Binder, and a Reader example demonstrating how to use it
* Ensure value is a string before binding
* Sample file for String Value Binder
* PHPCS moaning about order or use statements
* Order of annotations, that PHPStorm determined, isn't what phpcs says it should be
* Document calculation caching; and how to disable it and how to flush the cache
* Quoted text for string values beginning with `=`, so that they are still treated as strings and not as formulae
* Warning about assigning cells to variables
* Further warning about assigning cells to variables
`master` is now the only permanent branch. Features and fixes should be merged
into `master` when stable. Pull requests should be forked from `master`.
`develop` branch disappear entirely in favor of temporary features/fixes branches.
* - Refactored Complex Engineering Functions to use external complex number library
- Added calculation engine support for the new complex number functions that were added in MS Excel 2013
- IMCOSH() Returns the hyperbolic cosine of a complex number
- IMCOT() Returns the cotangent of a complex number
- IMCSC() Returns the cosecant of a complex number
- IMCSCH() Returns the hyperbolic cosecant of a complex number
- IMSEC() Returns the secant of a complex number
- IMSECH() Returns the hyperbolic secant of a complex number
- IMSINH() Returns the hyperbolic sine of a complex number
- IMTAN() Returns the tangent of a complex number
* Simplified the parseComplex() method in the PhpOffice\PhpSpreadsheet\Calculation\Engineering class, using Complex\Complex; and docblock flagged as deprecated
- Fix ISFORMULA() function to work with a cell reference to another worksheet
- Added calculation engine support for the new functions that were added in MS Excel 2013 and MS Excel 2016
- Text Functions
- CONCAT() Synonym for CONCATENATE()
- NUMBERVALUE() Converts text to a number, in a locale-independent way
- UNICHAR() Synonym for CHAR() in PHPSpreadsheet, which has always used UTF-8 internally
- UNIORD() Synonym for ORD() in PHPSpreadsheet, which has always used UTF-8 internally
- TEXTJOIN() Joins together two or more text strings, separated by a delimiter
- Logical Functions
- XOR() Returns a logical Exclusive Or of all arguments
- Date/Time Functions
- ISOWEEKNUM() Returns the ISO 8601 week number of the year for a given date
- Lookup and Reference Functions
- FORMULATEXT() Returns a formula as a string
- Engineering Functions
- ERF.PRECISE() Returns the error function integrated between 0 and a supplied limit
- ERFC.PRECISE() Synonym for ERFC
- Math and Trig Functions
- SEC() Returns the secant of an angle
- SECH() Returns the hyperbolic secant of an angle
- CSC() Returns the cosecant of an angle
- CSCH() Returns the hyperbolic cosecant of an angle
- COT() Returns the cotangent of an angle
- COTH() Returns the hyperbolic cotangent of an angle
- ACOT() Returns the cotangent of an angle
- ACOTH() Returns the hyperbolic cotangent of an angle
- Financial Functions
- PDURATION() Calculates the number of periods required for an investment to reach a specified value
- RRI() Calculates the interest rate required for an investment to grow to a specified future value
Passing 0 arguments will throw the following error:
"PHP Fatal error: Uncaught ArgumentCountError: Too few arguments to function PhpOffice\PhpSpreadsheet\Spreadsheet::getSheet(), 0 passed in {filepath} and exactly 1 expected"
The \PhpOffice\PhpSpreadsheet\Shared\Date class has support for setting an alternate timezone which affects the conversion of Excel Date timestamps in PhpSpreadsheet. This amendment is an effort to document this support.
Adrien Crivelli